Question about Procedure Text: How to Use

How to use a correction pen

 

1)   shake well the correction pen.

2)   Open the (.....)

3)   Press the tip of the pen on the misprinted word.

4)   Cover the word with the liquid.

5)   Let the liquid dry

6)   Correct the word.

 

1.Fill the blank spot with the right word

A. Cap

B. Label

C. Word

D. Liquid

E. Dry

Answer: A

Procedure

1. Sitting on a bike, make sure you know where the bikes are and how to operate them
2. You have to learn to balance the bike. Find a person who can hold your bike behind you and try to go steady as you pedal it
3. Finally, you have to practice. Once you can balance, pedal, start, and stop, you are bicycle rider. Congratulation!
4. As you gain experience, raise the seat up so that only your toes can touch the ground while you are seated.
5. When you are ready, ride alone. But first, lower the seat until you can sit and put both feet flat on the ground
6. After practicing for a couple minutes, the person can release his or her hands while you try to keep your balance

2. Arrange these sentences below into a good order
A. 1 – 2 – 3 – 4 – 5 – 6
B. 1 – 2 – 4 – 5 – 6 – 3
C. 1 – 2 – 6 – 5 – 4 – 3
D. 1 – 2 – 5 – 3 – 6 – 4
E. 1 – 2 – 4 – 6 – 5 – 3
Answer: C

 How to operate a photocopier properly

·                Press the "power" button to turn on the photocopier. If there is no response from the device, try to press the "copy" button. It may be turned to "sleep" mode.  Check the paper tray that is located on the side of the machine to ensure that the copier has enough paper in it.

·                Lift the photocopier's lid. Then, put your document on the glass surface. Put the side that you want to copy downward, facing the glass surface.

·                Close the copier cover after you are sure the document has been placed properly.

·                Press the digital number to select the number of copies you need. Press the plus and minus button to add or reduce the quantity.

·                Choose black-and-white copies or colour copies according to your needs.

·                After selecting the colour preference, specify the paper size. If you want to use special paper size, you have to feed that paper into the tray.

·                Finally, press the "copy" button and your document is copied.

3.What should you do when placing the document on the glass surface?

    A. Choose colour copies or black-and- white copies.

    B. Press the button to make changes.

    C. Put it downward on the glass.

    D. Close the copier cover.

    Answer: C

Procedure Text How To Use A Blender

By looking at the name “Blender”, we might be able to guess the function of this electronic devices. We put things inside the blender in order to “blend it” or “mix it”. If you never use a blender before, you may need to read this following procedure of how to operate a blender.

1. Prepare the ingredients that you want to mix. The ingredients can be vary, but mostly people use blender for these following things : Ice, vegetables, fruits, milk, or any kind of food and drinks.

2. Cut the ingredients into smaller pieces if the ingredients were solid and big.

3. Prepare the blender cup, make sure to clean it before we use it and put the blender blades on the bottom of the cup.

4. Place the blender cup on the blender machine.

5. Insert the plug into the electricity socket.

6. Put all of the ingredients into the blender cup.

7. Add some water to help the blender mix the ingredients evenly.

8. Close the lid and cover the blender cup tightly.

9. Start the blender by pressing the speed button, you can start from the medium speed

10. Wait until we get the right texture of the mixture, we can adjust the speed and also add some more water if necessary.

11. Open the blender and pour the mixture into a glass or bowl.

 

4. What should we do after Put all of the ingredients into the blender cup.

A. Open the blender and pour the mixture into a glass or bowl.

B. Add some water to help the blender mix the ingredients evenly.

C. Cut the ingredients into smaller pieces if the ingredients were solid and big.

D. Prepare the blender cup, make sure to clean it before we use it and put the blender blades on the bottom of the cup.

E. Insert the plug into the electricity socket.

Answer: B

 

5. When can we Close the lid and cover the blender cup tightly?

A. After Start the blender by pressing the speed button

B. After Insert the plug into the electricity socket.

C. After Add some water to help the blender mix the ingredients evenly.

D. After Place the blender cup on the blender machine.

E. After Cut the ingredients into smaller pieces if the ingredients were solid and big.

Answer: C. After Add some water to help the blender mix the ingredients evenly.